|
AC1000
Replacement Safety Key
Fits all RIDGID Stationary Tools and Edge
Belt/Spindle Sander.
|
AC1021
Deluxe Miter Gauge
With adjustable stops at 0°, 45° left and
right. For use with RIDGID BS1400 and EB4424.
|
|
AC1022
Miter Gauge Hold Down
Clamps the work piece to the miter
gauge. Fits 5/16"-18 threaded hole in the top of the
head and a 3/4" x 3/8" bar. Use with RIDGID TS2412 and
TS2400.
|
AC1025
7" Dado/Molding Insert
For use with 7" Dado blade or molding
head cutter. Use with RIDGID TS2424, TS2412, and TS2400.
|
|
AC1030
8" Dado/Molding Insert
For use with 8" Dado blade or molding
head cutter. Use with RIDGID TS2424, TS2412, and TS2400.
|
AC1035
Zero Clearance Table Saw Insert
Use with RIDGID TS2424, TS2412, and
TS2400, TS3612.
|
|
AC1036
Retro Fit Rip Fence
Provides 36" right and 12" left rip
capacity. Saws must be cast iron with 27" table front to
back and 10" minimum wide extension.
|
AC1050
Supersedes to AC9950 |
|
AC1060
Storage Hooks
Used to store rip fence, miter gauge,
or other accessories on-board your tool. Use with RIDGID
TS2412 and TS2424.
|
AC1098
No Longer Available |
|
AC1099
Radial Saw Dust Collector
Fits all RIDGID and Craftsman@ 10"
full-size stationary radial saws. Works with the blade
in any rip or crosscut position. Keeps your work area
clear of sawdust and wood chips. Collect dust at the
source. Reduces clean-up time. Attaches to your radial
saw and connects to your RIDGID Wet/Dry Vac or Dust
Collection System. Use with RIDGID RS1000.
|
AC2008
7" Triple-Cutter Molder Head
Allows your table or radial saw to do
joining, planing, and shaping cuts. For use on all
RIDGID table and radial saws and most other table and
radial saws with a 5/8" arbor. Includes the 4 cutter
sets shown - AC2101, AC2103, AC2111, AC2112. Use with
RIDGID RS1000, TS2424, TS2412, and TS2400.
|
|
AC2010
Molding Head Guard
For us on all RIDGID and CRAFTSMAN
(prior to 1999) Radial Saws except CRAFTSMAN models
2930, 2931, and 2932. Guard is used with molding heads,
dados and rotary planers up to 8" cutter diameter. Use
when standard guard cannot be used for straight edge
shaping, rabbetting, cabinet door molding, and surface
planing. Use with RIDGID RS1000. |
AC2020
Drill Chuck
Fits any arbor with 1/2"-20 threads. 1/2"
bit capacity, hardened jaws provide a wear resistant
gripping surface for accurate alignment of bits, 5/64"
up to 1/2" diameter shanks. Includes off-set "T" type
chuck key with spring pin. Use with RIDGID RS1000 and
WL1200. |
|
AC2030
Sanding Drum
For use with radial saws, drill
presses. For use with drill press, the AC6010 arbor must
be used. 2-1/4" diameter abrasive sleeve over expandable
rubber drum. Use with RIDGID RS1000, WL1200, and DP1500.
|
AC2040
Sanding Wheel
10" - 5/8" arbor. Allows flat, precise
disc sanding with your table or radial saw. Use with
RIDGID RS1000.
|
AC2101
Cutter Bit Set
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2102
Cutter Bit Set
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2103
Cutter Bit Set
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2104
Cutter Bit Set
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2105
Cutter Bit Set
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2106
Cutter Bit Set
Use
with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2107
Cutter Bit Set
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2108
Cutter Bit Set
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2109
Cutter Bit Set
Use with RIDGID RS1000.
Not for use with table saws.
|
AC2110
Cutter Bit Set
Use with RIDGID RS1000.
Not for use with table saws.
|
AC2111
Cutter Bit Set
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2112
Cutter Bit Set
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC3000
Miter Saw Clamp Kit
Provides added work piece stability. Use
with RIDGID MS1050 and MS1060 only.
|
AC6005
Mortising Kit
Convert your RIDGID Drill Press into an
accurate mortising machine. Use with RIDGID Mortise
Chisels (sold separately) to cut square holes for
various mortise and tennon joints. Includes storage
case.
Also fits DELTA models: 11-980; 11-990; 11-090; 14-040;
14-070; 17-900; and 17-925 drill presses.
Also fits SEARS models: 113.213130; 113.213150;
113.213170; 113.213840; 113.213850; and 113.213870 drill
presses.
Use with RIDGID DP1500.
|
AC5001
Band Saw Rip Fence
Contents: Rip Fence, Front and Back
Rails, Mounting Hardware and Instructions. Use with
RIDGID BS1400.
|
AC5005
Riser Block
Provides additional 6" depth of cut. Use
with RIDGID BS1400.
|
AC5006
Sanding Belt
92 1/2" replacement sanding belt. Use
with RIDGID BS1400.
|
AC5007
Cool Blocks™
Replacement blade guides. Use with RIDGID
BS1400.
|
AC6006 - AC6009
Assorted Mortising Chisel and Bit
Use with RIDGID Mortising Kit (AC6005
sold separately) to cut square holes for various mortise
and tenon joints:
-
AC6006 - 1/4" Mortising Chisel and Bit
-
AC6007 - 5/16 Mortising Chisel and Bit
-
AC6008 - 3/8" Mortising Chisel and Bit
-
AC6009 - 1/2" Mortising Chisel and Bit
Use with RIDGID DP1500.
|
AC6010
Work Arbor
Convert your RIDGID For use with RIDGID
DP1500 - 15" Drill Press or any stationary drill press.
1/2" - 20 Threaded Arbor with a 1/2" diameter shaft.
Mounts buffing wheels, wire brush wheels, and drum
sanders into drill chuck for added versatility. /font>
|
|
AC7001 - AC7015
Assorted Sanding Drum Sleeves -
2-pk
Sandpaper Sleeves
-
AC7001 - 1/2" Fine Sandpaper Sleeve
-
AC7002 - 1/2" Medium Sandpaper Sleeve
-
AC7003 - 1/2" Coarse Sandpaper Sleeve
-
AC7004 - 3/4" Fine Sandpaper Sleeve
-
AC7005 - 3/4" Medium Sandpaper Sleeve
-
AC7006 - 3/4" Coarse Sandpaper Sleeve
-
AC7007 - 1" Fine Sandpaper Sleeve
|
-
AC7008 - 1" Medium Sand paper Sleeve
-
AC7009 - 1" Coarse Sandpaper Sleeve
-
AC7010 - 1-1/2" Fine Sand paper Sleeve
-
AC7011 - 1-1/2" Medium Sandpaper
Sleeve
-
AC7012 - 1-1/2" Coarse Sandpaper
Sleeve
-
AC7013 - 2" Fine Sandpaper Sleeve
-
AC7014 - 2" Medium Sandpaper Sleeve
-
AC7015 - 2" Coarse Sandpaper Sleeve
|
|
AC8010
4" x 24" Work Arbor1/2-20 Threaded
Arbor with a #1 Morse Taper. Secures buffing wheels and
drum sanders to headstock and drill chuck to tailstock
or headstock. For use with RIDGID WL1200 12" Wood Lathe
and any other wood lathe with a #1 Morse taper.
|
|
AC8040
4" Face Plate
3/4"-16 Thread Connection. Holds up to an 8" diameter
bowl. For use with RIDGID WL1200.
|
AC8060
6" Face Plate
3/4"-16 Thread Connection. Holds up to an
12" diameter bowl. For use with RIDGID WL1200.
|
AC8070
Bowl Turning Tool Rest
Cast Iron with 7/8" diameter shank.
Replaces regular tool rest for face plate and bowl
turning. For use with RIDGID WL1200.
|
AC8600
6-1/8" Jointer Knives
Pack of 3 replacement knives. Use with RIDGID JP0600.
|
AC8601
Push Blocks - 2 Pack
Provide added work piece control. Use
with RIDGID JP0600.
|
AC8602
Dust Collection Kit
Includes hose, over center clamps, and 4"
x 2-1/2" reducer. Use with RIDGID JP0600.
|
AC8630
Replacement Planer Knives
Reversible for extended life. Fits RIDGID
TP1300 Thickness Planer.
|
AC8640
Dust Collector
Single knob included. 2 1/2" and 4" hose connection. Use
with RIDGID TP1300.
|
AC9910
Universal Leg Set
ONE SET
Fits all RIDGID bench top tools and most
other bench top brands. Adjustable height from 24" to
34". Adjustable footprint from 24" square to 32" square.
Works with RIDGID MS1250, MS1050, TS2400, TP1300,
SS1650, and EB4424.
|
AC9920
Herc-U-Lift™ Caster Set
Used on RIDGID and Craftsman® belt drive
table saws. Patented one step design allows easy 360°
mobility. Allows saw to rest on all four legs when
disengaged. Works with RIDGID TS2412.
|
AC9930
Work-N-Haul It™
Wide Footprint and non-skid-feet for
cutting stability. Stands upright like a two-wheel cart
even with your tool attached which means it requires
less floor space to store. Large 27" x 24" x 22" high
work surface. Works with RIDGID TS2400, MS1250, and
MS1050.
|
|
AC9933
Flip Top Stand
The All New Flip Top Stand™ Provides
Superior Support of Work Pieces as they are Cut,
Drilled, Planed, Sanded, Etc.
|
AC9950
Herc-U-Lift PLUS™
Easy 360º Mobility for Any RIDGID®
Stationary Tool with an Open Leg Set - Also Fits AC9910
Universal Leg Set and Some Craftsman Stationary Tools.
|
|
)
)
)
)
)
)
)
)
)
)